fssoli.blogg.se

Gitup action camera
Gitup action camera












  1. #GITUP ACTION CAMERA 1080P#
  2. #GITUP ACTION CAMERA MANUAL#
  3. #GITUP ACTION CAMERA UPGRADE#
  4. #GITUP ACTION CAMERA FULL#

On the right, there is an icon to show battery level and other icons below that to access saved clips for playback and download. Other settings on the left are for photo and video mode. The top left looks like motion detection and the one below that looks like time laps but not, do you know what they are? There are a lot of features on this app to change settings of the camera. Once connected, you'll see live view of the camera: Open the app and click on + to add camera:Ĭlick on the GITUP**** access point, enter password and click 'Add':

#GITUP ACTION CAMERA MANUAL#

The manual didn't mention what app to use so i searched and found FinalCamworks so downloaded it and installed. Then, you need an app to connect to the wi-fi access point. To connect the Git1 via Wi-Fi, press and hold the settings button for few seconds until it chimes few times and shows wi-fi is on The overall VBR is very high for Novatek based camera 17.8 mbps. (Yes, Lukas has both UV and CPL attached).įile names have date time so easy to find particular a clip.ģ minute video clip is around 383 MB in size. Git1 is using a sticky mount while the SJ7000 is using a suction cup mount with tripod screw. Side-by-side with Lukas LK-9370WD and SJ7000. Here's how Git1 is mounted in the vehicle: It was very cloudy today anyways.maybe it'll be Sunny later.

#GITUP ACTION CAMERA FULL#

I drove around town but in a hurry, I forgot to format the card and it was full with video from another camera so it couldn't overwrite. The frame has holes for OK/shutter, mini USB charging and settings button along with few smaller ones for mic/led etc. Used provided frame to mount as a dashcam using a suction cup mount from another dashcam and used reversed (upside down) image setting. The Pro version comes packaged with the following accessories: Git1 action camera and following accessories: The Git1 came in a well packed box and the camera itself also was well protected in foam compartment.īuild quality looks very good and feels nice and solid.ĭimensions (WxHxD): 2.3" x 1.2" x 1.6" / 59.0 x 30.0 x 41.0 mm

#GITUP ACTION CAMERA 1080P#

Rechargeable lithium-ion battery pack provides up to 90 minutes of 1080p recording Records to microSD/SDHC/SDXC cards up to 64GB Optional AV output cable for live video output Mini-USB port for data transfer, battery charging, and external microphone input (USB data cable included) Time-lapse mode (2 sec, 5 sec, 10 sec, 30 sec, 60 sec) Optional wrist-worn remote control available Has 900mAh battery that lasts for approx 120 minutes of recording.īuilt-in Wi-Fi for remote control and monitoring on iOS and Android devices.

gitup action camera

The display is 1.5" LCD screen in the back. This camera is based on Novatek chip and Sony Exmor IMX322 sensor.

gitup action camera

Plus there are much more optional accessories available at to purchase separately.

gitup action camera

PRO version comes with a lot of mounting accessories and waterproof case. There are two versions of the package, one standard and one PRO. It's available here at manufacturer's website:

  • Reconnect the camera to your computer and wait more seconds until you can chose Mass Storage from camera menu, the front green LED and back red LED will be blinking while upgrading.Thank you for providing this camera for review.
  • Copy the GIT2FW.bin file on the root of the card.
  • Delete GIT2LD.bin from the card using your PC and.
  • Reconnect the camera to your computer and wait few seconds until you can chose Mass Storage from camera menu.
  • After GIT2LD.bin is copied to the card disconnect the camera from computer.
  • Copy just the GIT2LD.bin on the root of the card.
  • Insert card in camera and connect it to computer using USB cable.
  • 32GB card formatted by camera or on computer as FAT32

    #GITUP ACTION CAMERA UPGRADE#

  • From V1.4 firmware, the firmware will be automatically deleted from Micro SD card after upgrade completed.
  • If you have already installed the V1.3 firmware, no necessary to upgrade the loader, please ignore the #3-#6 steps.
  • If you camera firmware version is V1.2 or earlier, please upgrade the loader GIT2LD.bin first.













  • Gitup action camera